• Customer  | 
  • +1 (800) 364-4844 sales@eiconnect.com
  • Follow Us


The AVR1010 is a complete, stand-alond stored program control computer on a chip. It requires no external components for full operation.

The ATV1010 is a full-featured DAQ computer packaged in a 28-pin skinny-DIP.

It consists of a high speed micro-controller capable of executing up to 8 MOPS (million operations per second) with no external support. The speed can be increased to 16 MOPS by the addition of an external crystal or external clock source.

It has on-board FLASH memory, EEPROM, RAM, 8 MHz oscillator, high speed UART, two high speed serial communications channels, 23 programmable input/output ports, counter/timers, PWM output channels, six channels of 10-bit analog to digital converters, an analog comparator, internal and external interrupts and everything necessary to implement a wide variety of high performance control and monitoring circuits.

In addition to the native capabilities of the micro-controller, a real-time operating system with stored program, an on board command interpreter, with multitasking capabilities and macro commands is included at no cost.

  • 8 MHz RISC operation.
  • 8 KB FLASH memory
  • 1 KB RAM
  • 0.5 KB Bytes EEPROM
  • Hardware multiplier
  • Two 8-bit timer/counters
  • One 16-bit timer/counter
  • Real time counter
  • Three PWM channels
  • Six channels of 10-bit A/D
  • Two-wire serial interface
  • Master/slave SPI
  • Watchdog timer
  • Analog comparator
  • Five sleep modes
  • 2.7V – 5.5V operation
  • Low power operation
  • 23 I/O ports
  • Two external interrupt inputs.
  • The macro command capability of the AVR1010 allow it to be used in entirely autonomous applications, with auto-boot operation.

    Macro commands may be loaded through a temporary serial interface connection, such as a USB smart cable, then operated without connection to a host computer if desired.

    Operation is also possible in direct mode through a similar serial connection, using interactive commands.

    The ATV1010 is packaged in a 28-pin skinny DIP format and can be mounted in a standard DIP socket for connection to the I/O ports and communication channels.

    It has all the necessary elements to implement multi- channel data acquisition systems, as well as hundreds of other useful functions, with no external components

    The three PWM channels can be used to control DC motors, Stepper motors and BLDC motors (with suitable external current boosters.)

    Low power options include active operation down to less than 3.6 mA, with sleep modes of < 1 microamp, supporting battery operated applications.

    The ATV1010 is a valuable addition to any engineers tool box. It is available in DIP form or TQFP and QFN surface mount packages.

Disclaimer:We just provide general information about DIVA AUTOMATION and its products. Any information contained or reference in this web site is suitable only as an introduction to DIVA AUTOMATION and its products.We can make no guarantee as to their accuracy or completeness, and we take no responsibility whatsoever for such information.

If you intrested to buy please enter your contact detail below.our sales representative will contact you soon

Buy now

Name * :  
Email * :  
Company :
Comments * :  
Type Verification Code As Shown below :

  I have read and accept terms and codition
Terms and condition written in description